Finanacing Avaliable
through

Farm Credit Express

Fast and Easy Process
image-732713-20180601_093444.w640.jpg
image-748266-20180815_153117.w640.jpg
image-748264-20180815_152955.w640.jpg
15 Foot Flex-Wing Brush Cutter MD-180

Gearboxes – 540 RPM or 1,000 RPM Three spindle gearboxes, 120 HP, base mounted, 1:1.47 ratio. One dividerbox, 160 HP, base mounted. All gearboxes have malleable housings, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings. 6 splined 1 3/8” input shaft, 2 3/8” output shaft on spindle boxes.


Drive Shafts – Shielded PTOs made from finest quality propeller shaft materials and needle bearing universal joints. Category 6 80-degree constant velocity main drive shaft, Category 4 intermediate and wing drive shafts.

Slip Clutch – Three heavy-duty clutches with spring type adjustment and two friction discs.

Blades – 1/2” by 4” material, alloy spring steel, airlift design. Free swinging when encountering obstructions. 8” overlap for better
cutting. Blade tip speed: 15,500 FPM.

Wheels – Four solid rubber tires standard. Independent shock absorbing system for all wheel axles. Cutting height adjustable from 2” to 15”. Optional: 6 tires, aircraft tires, implement tires and foam filled tires.

Dimensions – Cutting width: 15’. Cutting height: adjustable from 2” to 15”. Overall width: 190”. Overall length: 189”. Cutting height for aircraft and implement tires: 2” to 17”.

Transportation width: 88”

Weight – Without chains and tires: 3,700 lb.
With standard tires and single curtain chains: 4,340 lb.

Bush-Whacker Special Deck – Includes a center deck which has a primary (bottom) deck of 10 gauge steel that is welded to heavy duty heavy channel structures. The smooth, easy-to-clean top deck is made of 12 gauge steel and protects the inner support frame. The wing decks are smooth, easy-to-clean 10 gauge steel.

  • Hydraulic Adjustments – Hydraulic lift cylinders control raising and lowering of flexible wing (winch assembly for manual wing lift is optional). Wing may be raised to 88 degrees above horizontal and lowered to 22 degrees below horizontal cutting plane. Optional: rephasing level lift systems.
  • Other Standard Features Include – Replaceable center and full length wing skid shoes, transport locking bars for each wing, heavy-duty tongue assembly with dual leveling rods, hydraulic hose holder, park jack for easy hookup and unhooking from tractor. Swivel clevis to relieve stress on tractor drawbar. Rubber guards front and back. Chain guards are an added option.



image-720831-20180406_151458.w640.jpg
12 Foot Flex-Wing Brush Cutter MD-144

  • DRIVELINES
    #1 in its class with Cat 5 Drivelines on the Main Unit and Cat 4 Drivelines on the Wings
  • GEARBOXES
    #1 in its class with 120 HP capacity
  • GEARBOX SHAFTS
    #1 in its class with 1 ¾” 20 spline divider on the input and 2″ on the output
  • CUTTING CAPACITY
    #1 in its class with 2″ cutting capacity
  • CUTTING HEIGHT
    #1 in its class with a cutting height between 1 ½” to 13″



image-720832-20180406_151703.w640.jpg
image-748270-20180815_153332.w640.jpg
10 Foot Heavy Duty Brush Cutter HD-121

Gearboxes – 540 OR 1,000 RPM
, 250 HP main or transfer box with 1 ¾” 20 splined input and output shafts. Two spindle gearboxes, 250 HP, base mounted, 1:1.6 ratio. 20 splined 1 3/4” input shaft, 2 3/8” output shaft on spindle boxes. All gearboxes have forged alloy steel malleable housings, carburized and hardened gears and shafts, tapered and ball bearing.


Drive Shafts – Shielded PTO’s made from the finest quality propeller shaft material and needle bearing universal joints. Category 4 main input and side drives. Category 4 jack shaft for pull model. Category 4 80-degree constant velocity main drive shaft optional for pull model.

Slip Clutch – Heavy-duty clutch with spring type adjustment and four friction discs on main shaft, outboard protection by means of shock absorbing rubber elements connected to splined yokes which form a coupler.

Blades – 1/2” x 4” material, alloy spring steel, airlift design, free-swinging when encountering obstructions, 6 inch overlap for better cutting. Blade tip speed: 15,800 fpm.

Wheels – Two solid rubber tires standard. Independent shock absorbing system for all wheel axles. Optional: aircraft tires or implement tires, dual axle arms (4 tires total).

Bush-Whacker Special Deck – Bush-Whacker Special Deck includes a primary (bottom) deck of 7 gauge steel that is welded to heavy duty heavy tubing structures. The smooth, easy-to-clean top deck is made of 12 gauge steel and protects the inner support frame. Combined deck thickness: .2921”.

Dimensions – Cutting width: 121 inches. Cutting height: adjustable from 2” to 15”. Axles adjustable from 24” centers to 40” centers for row crops. Overall width: 131”. Overall length: 140”. Transportation wide: 131”. Cutting height for aircraft and implement tires: 2” to 17”.

Weight -3,565 lbs.

Chain Guards Front & Rear

image-791526-20190304_172408.w640.jpg
image-748274-20180815_153415.w640.jpg
image-791526-20190304_172408.w640.jpg
7 Foot Heavy Duty Brush Cutter ST-8410

Gearboxes – 120 HP, 540 RPM Base Mounted. Malleable housing, forged alloy steel; carburized and hardened gears and shafts; 1 3/8” – 6 spline input shaft, tapered bearings.


DRIVE SHAFTS – CATEGORY 4 – Made from the finest quality propeller shaft materials and needle bearing universal joints.

SLIP CLUTCH – Heavy duty spring-type adjustment with two friction discs.

BLADES – 1/2” by 3 1/2” material, alloy spring steel and airlift design that are free swinging when encountering obstructions. Blade tip speed: 15,490 FPM

WHEELS – For heavy duty 3 –point hitch: with tapered bearings and a 4” by 8” laminated puncture-proof tire.

DECK – 10 Gauge Smooth top deck for easy cleaning.

DECK RINGS – Standard

DIMENSIONS
Cutting height: adjustable from 1” to 9”
Overall width: 85”
Overall length: 129”
Transportation Width: 88.5”
Transportation Length: 129”

WEIGHT – 1750 lbs

QUICK HITCH ADAPTABLE – CAT2

SIDE SKIRTS – Shaped to fit the sides of cutter.

RECOMMENDED PTO HP – 50HP

CHAIN GUARDS

STUMP JUMPER – Standard

image-748271-20180815_153355.w640.jpg
image-748274-20180815_153415.w640.jpg
6 Foot Heavy Duty Brush Cutter HD-72

Gearboxes – 120 HP, 540 RPM Base Mounted. Malleable housing, forged alloy steel; carburized and hardened gears and shafts; 1 3/8” – 6 spline input shaft, tapered bearings.


DRIVE SHAFTS – CATEGORY 4 – Made from the finest quality propeller shaft materials and needle bearing universal joints.

SLIP CLUTCH – Heavy duty spring-type adjustment with two friction discs.

BLADES – 1/2” by 3 1/2” material, alloy spring steel and airlift design that are free swinging when encountering obstructions. Blade tip speed: 14,200FPM

WHEELS – For heavy duty 3 –point hitch: with tapered bearings and a 4” by 8” laminated puncture-proof tire.

DECK – 10 Gauge Smooth top deck for easy cleaning.

DECK RINGS – Standard

DIMENSIONS
Cutting height: adjustable from 1” to 9”
Overall width: 76”
Overall length: 101”
Transportation Width: 76”
Transportation Length: 101”

WEIGHT – 869 lbs

QUICK HITCH ADAPTABLE – CAT1

SIDE SKIRTS – Shaped to fit the sides of cutter.

RECOMMENDED PTO HP – 35HP

RUBBER GUARDS – Single Row Chain Guards optional.

STUMP JUMPER – Standard

image-732716-20180530_134218.w640.jpg
image-748276-20180815_153512.w640.jpg

Dual Spindle Heavy Duty Brush Cutter ST-104

Gearboxes – 540 RPM 120 HP main or transfer box, 100 HP outboard boxes with 2 1/8″ output shaft, malleable housing, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings.


Slip Clutch – Heavy-duty spring type adjustment with two friction discs on main shaft, outboard protection by means of shock absorbing rubber disc connected with splined spiders which form a coupler.

Blades – 1/2″ material, alloy spring steel, airlift design, free-swinging for clean cutting, mounted on shoulder bolts.

Two Tail Wheels – For 3 point hitch: Extra heavy-duty, tapered bearings, 4″ by 8″ laminated puncture-proof tires. For pull type: Extra heavy-duty, tapered bearings, 6″ by 20″ laminated puncture-proof tires.

Weight – 1,590 lbs.

Cutting Height – 2″ to 13″

Cutting Width – 10″ total cut, 57″ cutting swathe to right of tractor center line and 47″ to left of tractor center line.

Flat Steel Plate Sides – 1/4″ Material Shaped to form sides of cutter.

Bush-Whacker Special Deck – 7 gauge lower deck & 12 gauge upper deck. The smooth, easy-to-clean top deck protects the inner support frame. Combined deck thickness is 0.2921″.

Shielded PTO & Outboard Shafts – Category 4 – Made from finest quality propeller shaft material and needle bearing universal joints.

Chair Guards Front & Rear

Heavy-Duty Category One or Two Hitch